Polyethylene trash chutes are the choice of suppliers & contractors throughout North America. Superb ease-of-use and durability provide a quick, clean, & safe solution. Our designs have been perfected to provide you with the right tool for debris removal.
IDEAL FOR: Builders • Roofers • Scaffolders • Masons • Demo Contractors • Renovators
Sections are tapered tubes that attach quickly & easily to one another using built-in cable assemblies. Create chutes up to 200 ft. in length. Entry sections allow debris to be cleared from any floor level. Use Chute Hoists to install and support the chute.
4 foot tall (because linked sections overlap a little, 3 sections provide 10 ft. of drop).
slightly tapered (only 1 inch taper - tight fit minimizes airborne dust).
equipped with safe & strong cable linking hardware.
branded with your company name.
outstandingly resistant to abrasion, chemicals and cold.
lightweight, safe, flexible, and quiet in use.
made from yellow UV treated plastic.

•Large 7 1/2" ID hook with rubber crutch tip
for hanging over crest of roof.
•Interchangeable, interlocking 6' & 14'
sections fit together with steel bolts & wing nuts.
•Powder coat painted with raised rungs for ease
in climbing on pitched roofs

THIS IS USED FOR LIFTING MATERIALS TO THE ROOF. GAS AND ELECTRIC AVAILABLE. CALL FOR DETAILS. A 28FT 200LBS. OR A 400LBS RATED HOIST WITH A BRIGGS AND STRATTON GAS POWER DRIVE, CABLE, TOP SHEAVE AND CARRIAGE. Pricing for 200lbs rated Briggs & Stratton Only

The Qual-Craft Shingle SharkTM is designed to allow for accurate and repeatable cuts at any angle, as well as lengthwise cuts for starter course used along lower edge of the roof.

Versatile!
Cuts any angle.
Cuts any asphalt or fiberglass shingle.
Cuts starter row either U.S. or Metric.
Cuts material face up or face down, and from either top or bottom edge as desired.
Cuts ridge cap.

Cuts Lengthwise
Makes lengthwise cuts for starter row.
Two offset holes - one for metric, the other for U.S. shingles.

Cuts Angles
Crosscut guide adjusts full 180? for any angle. Cuts face up or face down and from either the top or bottom edge.

Can be set up by using a cleat to prevent slippage. Can also be set up by using a piece of 2x10 lumber and footing the tool against it, or by using a 6�x90? roof bracket.

54� Long Handle
Model # 2560
General Purpose Shingle Remover

THIS RAKE IS USED WHEN NAILS, SCREWS, ANYTHING METAL NEEDS TO BE PICKED UP IN A QUICK MANOR. NO MORE PUNCTURED TIRES OR TIME CONSUMING PICK UPS. THE RAKE IS 60"LONG, THE RAKE IS 15"WIDE WITH 14 TEETH THAT ARE 1 1/2" LONG.

The new Magnetic Mini Sweepers are lightweight, durable and easy to use. Ideal for homeowners and small shops. 30" handle make these sweepers perfect for clearing metal debris from walkways, garages and yards.

Side Wall
Staging Bracket

This sturdy, steel constructed bracket bolts through walls with adjustment for wall thickness. Supports a 36� platform constructed of 2� thick planks. Holds two workers plus 75lbs. per 8 foot staging, no more than 8 foot span between brackets. Must use guardrails when installed over 6 feet above ground. Folds for compact storage and transportation.

Model #2203
Workbench and Guardrail Holder Combo

Substantially cut work time with a workbench attached to the pump jack scaffold. Guardrail holder included.