The 4' high by 4' long taper scaffold it the most heavy duty available. Constructed of heavy duty angle iron steel, with reinforced side bars and a heavy duty center hinge. There are two step/platforms that come with it. The side shelf units provide for easy placement of tools and other accessories.

The two SLPâ„¢ poles extend from 4' 9" to 12 feet.
The poles can be placed 8 to 10 feet apart. If there is any significant air movement that pushes the plastic you will want to pull them in closer together.
The GripDiskâ„¢ slide stoppers should always be used especially on hard surfaces. Two GripDiskâ„¢ slide stoppers come in every SLP2 package.
Plastic sheeting is not included.
2 spring loaded poles
2 grip disks
2 tethers

The four SLP poles extend from 4' 9" to 12 feet.
To use the Foam Rails you will need to remove the head of the SLP pole by pulling the head straight off. Then snap the Foam Rail onto the pole. Each foam rail is five feet long.
The GripDisk should always be used especially on hard surfaces.
Plastic sheeting is not included.
4 SLPs
2 Foam Rail cross bars
4 Grip Disks
2l standard zippers
1 Carry bag

Folds to only 4" flat for easy storage and transporting.
Fits easily in the back of a van or trunk of a car.
1" O.D. tubular steel frames with two 14 gauge solid steel platforms.
Optional 14 gauge steel paint shelf fits on top of side ladder.
5" (12.7 cm) Indy Locking Casters.
Two 14 gauge (2 mm) Steel Platforms included.
SU-4 4 Ft.(131 cm), 51.5" high x 48" long x 22" wide

This cart is designed for the safe and easy moving of drywall panels and plywood. The swivel casters allow for increased mobility and ease of moving. The hand/stabilizer bar is removable for easy storage.

The Telpro panel lift is the top of the line in drywall accessories. This tool will enable you to hang drywall anywere.

AP-20 (Open) 50-1/4" 20-9/16" 15-5/8" 2.12 12.8
AP-20 (Closed) 15-5/8" 40-3/4" 5-3/4" 2.12 12.8
AP-20 16-5/8" 41" 35-3/4" 14.02 75.0



Note: Load capacity combines the total weight of both the user and the materials.

Dimensions
Top: 39-1/2" x 12" Highest Standing Level: 20-9/16"

Our economy model is perfect for painters, electricians and any other interior light duty work. It has solid steel construction and versatile height settings.

Each Side Clampâ„¢ wall mount is made of polycarbonate and is very tough.
This product can easily fit into the carry bag with poles and Foam Railâ„¢ cross bars.
In some situations where you have large crown moldings and base board heat on the same wall the pole may be to far from the wall for the Side Clampâ„¢ wall mounts to reach.
2 Side Clamps